Network Cards

Works "out of the box" on OS4.1 systems with the RTL8169.device driver.

This older PCI-based 802.11b card brings the world of wireless networking to your AmigaOne when used in conjunction with the OS4-native prism2.device driver. Recent versions support WEP and WPA authentication methods.

Works with eth3com.device unit 1 for PCI card.

Works with eth3com.device unit 1 for PCI card.

eth3com.device does not appear to recognise card.

This is an external wireless bridge for all type ofdevices with an ethernet port.The setting are not editable in either IBrowse or Awebdue to missing JavaScript functions. So unless you havea PC, Mac or Linux computer which can edit the se

3COM office connect switch 8 ports(HUB).

Wireless Ethernet adapter/bridge to connect to the ethernet port of the amigaone
category 802.11b
works without driver, configuration through web browser
working fine with Linksys WRT54G (Wireless router) connected to an ADSL modem

The C Variant of the 3C905-TX card series works as it uses the same chip the A1 also have on-board. Just refer to unit = 1 for the PCI card version and use eth3com.device, thats it.

PCI card is recognized by OS4 but the eth3com.device fails to initialize it correctly. You get MAC address, link speed etc. correctly read from the device but no data can be send or recieived.