Last updated : 10th Apr 2017 Hardware entries : 395 Software entries : 665
IntuitionBase Lists OS4 Commercial SW OS4 Compatible SW OS4 Compatible HW OS4 SW/HW Dealers Featured Content Feature Articles IRC Transcripts Multimedia Archive Links Site Info Home About Contact Shop Advertise Search Partner Sites Official AOS4 Website Official AOS4 Support Fora Official AOS4 Docs Wiki Amiga Future Magazine OS4 Coding OS4 Depot AmiNet New AmigaOne Systems AmigaOne 500 -> Overview -> Buy now! AmigaOne X1000 -> Overview -> Buy now! SAM460ex -> Overview -> Buy now! SAM440ep-flex -> Overview -> Buy now! Used AmigaOne Systems Introduction Available Operating Systems Yellow Dog Linux FAQ UBoot CPU Modules Replacing ROM AmigaOne G3-SE -> Overview -> Pictures AmigaOne XE -> Overview -> Pictures -> Official Manual Micro A1 -> Overview -> uA1-C Specification -> uA1-C Pictures -> uA1-C Handbook About AmigaOS Introduction Features Screenshots Customisation Hints and Tips FAQ Install FAQ		Hardware compatibility   Ethernet Cards    Model Manufacturer Chipset OS4 Linux   GA311 NETGEAR RTL8169S Notes: Works "out of the box" on OS4.1 systems with the RTL8169.device driver.   MA311 NETGEAR Prism2 Notes: This older PCI-based 802.11b card brings the world of wireless networking to your AmigaOne when used in conjunction with the OS4-native prism2.device driver. Recent versions support WEP and WPA authentication methods.   3C905B-TXNM Fast Etherlink XL PCI 3com 3C905B Notes: Works with eth3com.device unit 1 for PCI card.   3C905B-TXNM Fast Etherlink XL PCI 3Com 3C905B Notes: Works with eth3com.device unit 1 for PCI card.   3C905B-TXNM Fast Etherlink XL PCI 3Com 3C905B Notes: eth3com.device does not appear to recognise card.   DWL-G810 D-Link N/A Notes: This is an external wireless bridge for all type of devices with an ethernet port. The setting are not editable in either IBrowse or Aweb due to missing JavaScript functions. So unless you have a PC, Mac or Linux computer which can edit the se   3C16794 3COM 3COM Notes: 3COM office connect switch 8 ports(HUB).   WET11-FR Linksys N/A Notes: Wireless Ethernet adapter/bridge to connect to the ethernet port of the amigaone category 802.11b works without driver, configuration through web browser working fine with Linksys WRT54G (Wireless router) connected to an ADSL modem   3C905C-TX 3COM 3C920C Notes: The C Variant of the 3C905-TX card series works as it uses the same chip the A1 also have on-board. Just refer to unit = 1 for the PCI card version and use eth3com.device, thats it.   3C905-TX 3COM 3C905 Notes: PCI card is recognized by OS4 but the eth3com.device fails to initialize it correctly. You get MAC address, link speed etc. correctly read from the device but no data can be send or recieived.   Page 1 of 2   [Submit Hardware]
©2004-2015 IntuitionBase