Before we begin
Before we begin it's important to make sure we have the following available:
- OS4 Final install CD
- Your favourite brew
- Patience (you have to wait a little longer)
- The readme file - you have read it right????:
InstallCD 52.6 README
Again, note that an Upgrade installation is NOT supported. This installation WILL overwrite your SYS: partition. |
Overview
OS4, final, contains the new memory system, PNG icon support without the PowerIcons patch, some OEM software, new icons, speed, efficiency...
You get the idea! The full list of features can be found on Hyperion's webiste.
Known Problems
- It has been reported that a number of users have problems if trying to install from a CDRW so it is recommended you burn the install image to a CD-R directly.
- If you find the CD boots to the point that you should see the Workbench but instead only have a black screen, try disconnecting a floppy drive if you have one connected.
- Limpidclock can give DSI errors - v1.7 is believed to work correctly.
- DSI errors seem to occur from a number of applications - more discussions on Amigaworld
First steps
Backing up
As the readme file states, this install is not an upgrade and will overwrite SYS:. The install should work fine but in case it doesn't it is recommended that you backup. You can use drag and drop to copy your SYS: partition to another if you wish but those familiar with the CLI may prefer:
copy sys: all backup:os4pre/ clone
Which will copy your SYS: partition to the backup:os4pre drawer exactly - all files, all attributes.
Once you have a backup you may wish to take a few moments to look around OS4 pre-release 4 (or whichever you had installed) as this may be the last time you see it!
Booting up
It is possible to boot directly from the OS4 final CD and this is the recommended way to proceed. Follow the steps below:
- Switch on your AmigaOne and insert your OS4 final CD.
- When you see the message Booting. Press ENTER for boot select, any for other options, press enter.
- You will now be in the UBoot bootup configuration menu, the boot device option should already be selected. Press enter and select the option that applies to your CDROM drive (in my case this was Onboard VIA IDE CDROM
- Press escape
- Choose boot this configuration - this will boot using the settings you have just specified this time only.
- You should see your AmigaOne boot as normal but from the CD!
Installing OS4 final
Once your system has finished booting from the CD (be patient, it will be slow in comparison to booting from hardisk - that's what your favourite brew is for...) the install will start automatically. Similar to the pre-release installs you will need to choose your keyboard layout, timezone and chosen language. You will then be shown the familiar installer - do not start the installation yet!
Before you actually perform the install you will need to format your old sys: partition. It is not recommended that you overwrite your old files - you should format the partition and perform a clean install.
The install copies a lot of files so may take some time, during the install you will be required to choose your screenmode but other than that the install is automatic.
Once the install is complete please perform a hard reset and enjoy OS4 final!!
Configuration
You will need to reconfigure some parts of your system - most noticably your network settings. The quick way round this is to copy your configuration files from DEVS:internet/ but you may wish to set it up by hand again if you do not feel confident.
Your backrdop will also need re-applying via the WB Pattern preferences program and AHI modes will also need changing to match your requirements.
The other changes you will need to make is the replacement of all your custom libraries and assigns as OS4 final will not include assigns from your old startup or user-startup sequences. MUI custom classes and libraries you have added will need adding again.
Wookiechat, Tunenet, Amipodder, YAM, Simplemail and any other software you use regularly that relies on custom modules will need to have these replaced before they will load.
OEM Software
IBrowse 2.4 OEM
sys:utilities/ibrowse
As was originally promised, and in line with most modern operating systems, OS4 final comes bundled with IBrowse 2.4 OEM. There are a number of limitations to the OEM version but not as many as are imposed when compared to the demo version.
If you have registered IBrowse you cannot just drop your Ibrowse2key into the SYS:Utilities/Ibrowse directory - I tried this and it refused to acknowledge the key. To get round this (and to use your registered IBrowse again) download IBrowse 2.4 from the Ibrowse website and drop your key into there. If you have already downloaded 2.4 you will just need to re-direct the Amidock icon.
IBrowse homepage
DVPlayer
sys:utilities/DvPlayer
DVPlayer is movie playing software for OS4 capable of playing a number of formats (for more information see the DV Player homepage) and an OEM version is bundled with OS4 final. The OEM version does not have the registration splash screen but please register if you find the product useful, encouraging further development.
DVPlayer homepage
Miscellaneous
PNG icons
To make use of PNG icons, without the powericons patch you will need to install the PNG icon module, available on OS4 depot.
OS4 PNG Icon module (on OS4 Depot)
SVG Datatype
SVG, scalable vector graphic, is an image format that is infinately scalable without pixelation. Previously, there was no way to read this on OS4 but the SVG datatype is now available.
SVG datatype (on OS4 Depot)
Epistula
The Epistula instant messenger client is available for OS4 final, a special update just for Christmas.
Epistula homepage
Additional Documentation
- OS4 install documentation (on the install CD)
- AmigaWorld.net news story - IT'S DONE
- OS4 final feature list on Hyperion's site
Written by:
Jonathan "GiGa" Haddock
Published: 26th December 2006
Updated: 28th December 2006