The MicroAmigaOne-Consumer....

• CPU
  - The µA1-C, just like the XE systems has a MagArray 300 connector for PPC processors made by IBM and Motorola and will handle G3/G4 CPU's up to their current clocking limits
  
• Memory
  - PC133MHz SODIMM slot.can take up to 2GB.
  
• Legacy Peripherals
  - Parallel 1x EPP/ECP,
  - 2x Serial (on internal headers)
  - JoyStick/Midi port
  - PS2 kb and PS2 mouse ports.
  
• Integrated Peripherals
  - 2x 1.1 USB on the motherboard rear ITX I/O panel)
  - 2 more on headers (using a front bay connecter)
  - Ethernet: 10/100 with 3COM 920C controller
  - Sound: Cmedia CMI8738 6 ch controller with 3.5mm mic, aux and speaker jacks
  - UDMA 100 2 channel interface (VIA686B)
     1 44 way (2.5" IDE)
     1 40 way (Standard IDE)
  
• PCI
  - One PCI slot on board.
  - With a suitable riser card you can add upto 3 PCI slots
  
• Graphics interface speed
  - ATI Radeon 7000 AGP graphics controller on board with VGA, S-Video and composite output with 32MB of non-shared memory.
  
• BIOS
  - Uboot socketed, with OS4 enabling code
  
• The chipsets which are used on the A1-XE are also on the mA1 including the
  - North Bridge- Articia "S"
     which is the bridge board between the CPU, memory and PCI bus
  - South Bridge- VIA 82C686B,
     the chip that handles the system timing, interrupts, and communications between functions